Acer Aspire Zc610 Disassembly Full [extra Quality] May 2026

Acer Aspire ZC-610

Disassembling the All-in-One (AIO) desktop requires careful handling of plastic clips and specific screw locations to avoid damage to the chassis. Preparation & Tools

Step 4: Remove the Wi-Fi Card & CMOS Battery

Step 1: Removing the Stand and Base

Lifting Away:

Once all clips are free, lift the back cover straight up to reveal the internal metal shielding and components. 3. Accessing Internal Components acer aspire zc610 disassembly full

Surface Protection:

Lay the PC face-down on a soft, flat surface (like a towel or foam mat) to protect the LCD screen from scratches. 2. Removing the Stand and Outer Screws Remove 4 screws (Torx T10) Pry stand away

Step 3: Remove the Metal EMI Shield

Once the back cover is removed, you will see the metal shielding or the motherboard itself. Lifting Away: Once all clips are free, lift

  1. Disconnect all ribbon cables from the motherboard to the screen, button board, webcam, etc. Mark them with tape if necessary.
  2. Remove the screws securing the motherboard to the chassis (typically 4–6 screws with distinct arrows or circles around them).
  3. The motherboard may be stuck with thermal pads or adhesive – carefully pry up with a plastic tool.
  4. Lift the motherboard straight up – avoid bending it.