Ap1g2-k9w7-tar //top\\ -

ap1g2

refers to the hardware platform (AP1700), and k9w7 indicates this is a WLC-based (Lightweight) image , not an Autonomous one (which would be k9w8 ).

w7:

Signifies that this is an Autonomous (Standalone) image. Access points using this image can be configured and managed individually without a Wireless LAN Controller (WLC). (In contrast, w8 images are "Lightweight" and require a controller to function). Ap1g2-k9w7-tar

2. Determine the Purpose of the Guide

Note: Image must be named exactly as ROMMON expects. ap1g2 refers to the hardware platform (AP1700), and

1. Set up a TFTP server (like Tftpd64) on your PC.
2. Place the .tar file in the TFTP root folder.
3. Connect the AP to the PC via Console cable and Ethernet.
4. Interrupt the boot process in ROMmon mode.
5. Use the command:

   tar -xtract tftp://<PC_IP_ADDRESS>/ap1g2-k9w7-tar.<version>.tar flash: