Ezp2010 Programmer Driver Windows 10 < 99% Recent >

Mastering the EZP2010 Programmer: A Complete Guide to Drivers, Windows 10 Compatibility, and Troubleshooting

If the above method does not work, you can use Zadig to install the driver.

Last updated: 2026 – Tested on Windows 10 Pro 22H2, Windows 11 24H2. Ezp2010 Programmer Driver Windows 10

What you need to look for:

You typically need a "Driver Pack" or "Software Pack" that contains two things: Mastering the EZP2010 Programmer: A Complete Guide to

  1. Extract the EZP2010 software folder (ensure it is unzipped; do not run it from inside the ZIP file).
  2. Locate the main executable (usually named EZP2010.exe).
  3. Right-click the executable and go to Properties.
  4. Check the box Unblock at the bottom of the General tab (if visible) and click Apply.
  5. Run the software as Administrator.
  6. In the software, ensure the COM Port selected matches the one you saw in Device Manager.

EZP2010 Programmer

To use an on Windows 10 , you must bypass Windows' security restrictions, as the device uses unsigned drivers. This guide covers the specific steps to disable driver signature enforcement, install the software, and fix common "Not Connected" errors. Step 1: Disable Driver Signature Enforcement Extract the EZP2010 software folder (ensure it is

  • Settings → Update & Security → Recovery → Restart now (under Advanced startup).
  • Troubleshoot → Advanced options → Startup Settings → Restart → Press 7 or F7 to Disable driver signature enforcement.

Device Manager

Open , find the "Unknown Device" (often listed under Silicon Labs Software), right-click it, and select Update driver .

  • Use FTDI official VCP drivers: FTDI VCP.
  • Same process: download, run installer, connect device.