The (Remote Programming Software) by Bosch Sicherheitssysteme is the core tool used for configuring and maintaining the FPA-5000 , FPA-1200 , and newer AVENAR fire alarm systems.
The FSP5000RPS programming software is a powerful tool that provides users with a comprehensive set of tools for configuring, monitoring, and controlling the FSP5000RPS power supply system. With its user-friendly interface and advanced features, the software is an essential tool for users who need to optimize the performance of their power supply system. By following this exclusive manual, users can unlock the full potential of the FSP5000RPS programming software and take their power supply system to the next level. fsp5000rps programming software manual exclusive
: Supports configuring panel-to-panel communication over Ethernet or CAN loops, including redundant topologies for larger installations. Diagnostics & Maintenance License binding: Software works only on registered PC
0x1FF = 0x5A5A to disable parameter writes until next power cycle.| Command (hex) | Name | Description | Read/Write | |---------------|------|-------------|-------------| | 0x20 | VOUT_MODE | Linear/Exponential format | R | | 0x21 | VOUT_COMMAND | Set output voltage (mV) | R/W | | 0x22 | VOUT_TRIM | Fine-tune voltage (±5%) | R/W | | 0x29 | IOUT_CAL_GAIN | Calibrate current sense | R/W | | 0x40 | VOUT_OV_FAULT_LIMIT | Overvoltage shutdown threshold | R/W | | 0x4F | OT_FAULT_LIMIT | Over-temp fault (deg C) | R/W | | 0x78 | STATUS_BYTE | Fault summary | R | | 0x79 | STATUS_WORD | Detailed status | R | | 0x8A | MFR_SPECIFIC_00 | Fan PWM duty cycle (0–255) | R/W | fsp5000rps programming software manual exclusive
The FSP-5000RPS programming software is a comprehensive tool that allows users to configure, monitor, and control the power supply system. The software provides a user-friendly interface to access various functions, including:
Use – response confirms addressing and bus health.
Use the "Search" function to let the software automatically find devices on the loop.