Honeywell Notifier Nfs-320 Programming Manual May 2026

Decoding the Brain of Fire Safety: A Guide to the Notifier NFS-320 Honeywell Notifier NFS-320 Go to product viewer dialog for this item.

Sensitivity Levels

: For the server room, he set a higher sensitivity; for the breakroom where the toaster lived, he dialed it back using the nine available sensitivity levels. honeywell notifier nfs-320 programming manual

The NFS-320 hummed. The red fault LED went dark. The green “POWER” and “CPU OK” lights held steady. Decoding the Brain of Fire Safety: A Guide

  1. Enter Programming Mode: Press Enter -> Type **** (Technician code) -> Press Enter.
  2. Navigate: Use the arrow keys. The manual shows you need to see Program on the screen. Press 1.
  3. Select Point: Press 1 again for Point Program.
  4. Select Loop: Type 1 -> Press Enter.
  5. Select Address: Type 025 -> Press Enter.
  6. Set Type: The manual tells you that S = Smoke Detector, H = Heat, P = Pull Station. Select S.
  7. Set Zone: Type 03 -> Press Enter.
  8. Write: Press Enter to save. The panel will beep.
  1. Access the Programming Menu: Enter the programming menu by pressing the "PROG" key on the panel's keypad.
  2. Select the Programming Option: Choose the programming option you want to configure (e.g., system configuration, point configuration, etc.).
  3. Enter the Required Information: Enter the required information for the selected programming option (e.g., system time, point type, zone assignment, etc.).
  4. Save the Changes: Save the changes by pressing the "ENTER" key.