Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 !full!
The official driver for the HPE Smart Array S100i SR Gen10 SW RAID
- Boot the Server: Power on the ProLiant Gen10 server and press F10 during POST to enter Intelligent Provisioning.
- Perform Maintenance: Navigate to the Perform Maintenance menu.
- Install OS: Select Install OS.
- Media Selection: Insert the Windows Server 2022 ISO or media. Intelligent Provisioning will scan the hardware.
- Driver Injection: The IP engine will automatically detect the S100i controller and inject the necessary storage drivers into the Windows installer environment.
- Installation: Proceed through the Windows Setup wizard. The logical drives configured in the S100i RAID Array Configuration Utility (ORCA) will now be visible as installation targets.
This comprehensive guide dives deep into everything you need to know about the S100i driver—from its architecture and use cases to step-by-step installation, verification, and troubleshooting. The official driver for the HPE Smart Array
- Device Manager → Storage controllers → should show:
HPE Smart Array S100i SR Gen10 SW RAID - Disk Management → RAID volumes visible.
- Command line (admin):
wmic diskdrive get model→ look for HPE Logical Drive entries.
Since the S100i is software-based, performance is tied to the CPU. Boot the Server: Power on the ProLiant Gen10
Intelligent Provisioning (Recommended):
Use the assisted installation option in HPE Intelligent Provisioning. This automatically injects the required drivers during the OS setup. Manual Injection: This comprehensive guide dives deep into everything you
The following table provides a summary of the key features and benefits of the HPE Smart Array S100i SR Gen10 software RAID driver for Windows Server 2022: