Huawei Dg8245v Firmware Update -upd- Page

Short verdict

2. Objectives

Prerequisites: What You Need Before Starting

Default Password

: @HuaweiHgw (or check the label on the bottom of the device).

Critical Note:

ISPs like Ooredoo, Vodafone, and China Telecom brand their firmware. A generic update might remove your ISP’s custom VoIP settings. Always back up your configuration first. Huawei Dg8245v Firmware Update -UPD-

Step-by-Step: Manual Firmware Update (if supported)

  • New Firmware: V300R018C10SPC120_UPD (Build 0321)
  • Hardware unchanged: 1A2B3C

ISP auto-update

| Method | Best for | Risk | |--------|----------|------| | (TR-069) | Most home users | None | | Manual via ISP support page | Advanced users | Low if using correct file | | Huawei ONT tool (ont040) | Technicians only | High – can permanently lock device | Short verdict 2

  1. Set your PC’s IP to 192.168.100.10 (Subnet mask: 255.255.255.0).
  2. Run TFTPD32 as administrator. Set the current directory to where your .bin file is.
  3. On the TFTP server tab, set "Server interfaces" to 192.168.100.10.
  4. Open a command prompt and type: tftp -i 192.168.100.1 PUT DG8245V_UPD.bin
  5. The ONT will flash, reboot, and load the new firmware.
Scroll to Top