Ibm Ts3310 Admin Account Locked -

For an IBM TS3310 Tape Library, a locked admin account typically occurs after multiple failed login attempts. To resolve this, you can either wait for the lockout period to expire or perform a manual reset using the physical operator panel. Method 1: Waiting for Automatic Unlock

Wait for Auto-Unlock:

Many IBM systems automatically unlock an account after a cooling-off period, typically 60 minutes . ibm ts3310 admin account locked

The IBM TS3310 Tape Library features a security mechanism that locks an administrative account after a configurable number of consecutive failed login attempts. When the “admin” account (or any custom admin-level account) becomes locked, the library’s management interface—whether web-based or through the Operator Panel (OP)—rejects further login attempts. This situation halts configuration changes, diagnostic access, and routine administrative oversight until the lock is cleared. This document details the causes, immediate recovery steps, and long-term preventative measures for this scenario. For an IBM TS3310 Tape Library, a locked

If Method 2 fails because the service password is also unknown, you can perform a hardware factory reset. Serial cable (null-modem) to a PC/laptop

• Serial cable (null-modem) to a PC/laptop.
• Settings: 19200 baud, 8 data bits, no parity, 1 stop bit, no flow control.

Warning:

The service account is exceptionally powerful. It can also reset the primary management network settings if the library is stuck due to an IP conflict.

Document Version:

1.0 Last Reviewed: 2026-01-12 Approved by: IBM Storage Tivoli Engineering (simulated)

Alternative Default Credentials

: If the library was recently upgraded to firmware 1.90 or later, try the password adm001 for the Admin account. Wait for Automatic Unlock