Icom Ui7 Am Fm Unit Install -
is an optional add-on board designed to enable AM transmission FM transmission/reception for specific Icom HF transceivers, most notably the
Before opening your radio, you must protect the sensitive internal circuitry. icom ui7 am fm unit install
Carefully remove the screws and set them aside in a small tray. is an optional add-on board designed to enable
- [ ] All connections are crimped and heat-shrunk (no electrical tape).
- [ ] DC fuse is within 6 inches of the power tap.
- [ ] Control cable is zip-tied to prevent vibration unplugging.
- [ ] AM/FM antenna cable has a drip loop (water runs away from UI7).
- [ ] UI7 is mounted with connectors facing down.
- [ ] VHF radio menu is set to “UI7 Enabled.”
- [ ] Amplifier remote turn-on is connected (if used).
- [ ] Ferrite core installed on DC power.
- [ ] Tested AM, FM, and Weather Band at dock AND under engine power.
Part 3: Step-by-Step Icom UI7 AM/FM Unit Install – Wiring
is an optional add-on board designed to enable AM transmission FM transmission/reception for specific Icom HF transceivers, most notably the
Before opening your radio, you must protect the sensitive internal circuitry.
Carefully remove the screws and set them aside in a small tray.
- [ ] All connections are crimped and heat-shrunk (no electrical tape).
- [ ] DC fuse is within 6 inches of the power tap.
- [ ] Control cable is zip-tied to prevent vibration unplugging.
- [ ] AM/FM antenna cable has a drip loop (water runs away from UI7).
- [ ] UI7 is mounted with connectors facing down.
- [ ] VHF radio menu is set to “UI7 Enabled.”
- [ ] Amplifier remote turn-on is connected (if used).
- [ ] Ferrite core installed on DC power.
- [ ] Tested AM, FM, and Weather Band at dock AND under engine power.
Part 3: Step-by-Step Icom UI7 AM/FM Unit Install – Wiring