Infineon Memtool 49 Verified -

Infineon's MemTool 4.9 is an official software utility designed for on-chip memory programming across several of their microcontroller families. It is primarily used to handle FLASH and OTP (One-Time Programmable) memory devices. Core Capabilities Broad Device Support : It is compatible with major Infineon families including XC800, XC16x, XC2000, XMC1000, XMC4000 , and the widely used AURIX/TriCore Functional Tasks

False.

CRC checks only detect packet errors during transfer. MEMTOOL's 49-step verify reads the physical flash array via the debug interface, checking each memory cell’s threshold voltage. infineon memtool 49 verified

Partially false.

Versions before V4.0 used a 16-step verify. True deep verification requires MEMTOOL V4.9 or newer (hence the "49" reference). Infineon's MemTool 4

• “49 verified” – Verification passed. Data integrity confirmed.
• Error – Mismatch triggers a failure notification.

• [x] Perform full verification after programming.
• [x] Verify all bytes (not just checksums).
• [x] Enable slow verify (increases time but enables all 49 steps).
• [x] Read back and compare byte-by-byte.

Hardware Interfaces

: Target connection is typically established via: “49 verified” – Verification passed

Description:

Currently Memtool reports overall verify status. We need detailed verification per memory sector/block, with clear identification (like “49 verified”) to isolate failing regions during production programming.