Motorola Gm338 Programming Software Verified Download Upd Link Here

Obtaining the official Motorola GM338 Customer Programming Software (CPS)

1. Install the Software: Download the CPS package. Disable your antivirus temporarily (it often flags radio software as a false positive) and install the software.
2. Connect the Radio: Plug your programming cable into the radio and the PC.
3. Open CPS: Launch the Motorola Professional Radio CPS.
4. Read the Radio: Go to File > Read Radio. This pulls the current configuration into the software. Always do this first so you have a backup of the original codeplug.
5. Edit Frequencies: Navigate to the "Channel Information" tab. Here you can set your RX/TX frequencies, CTCSS (PL) tones, and DPL codes.
6. Write to Radio: Once configured, go to File > Write Radio.

1. Operating System: Windows 10, Windows 7, or Windows XP
2. Processor: 2 GHz or faster processor
3. Memory: 2 GB or more RAM
4. USB Port: A free USB port for connecting the radio to the computer

If you're unable to find the software on the official Motorola website, you can try alternative sources: motorola gm338 programming software download upd link

1. Visit the Motorola Solutions Website: Go to the Motorola Solutions website and navigate to the "Support" or "Downloads" section.
2. Check for Updates: Search for updates specifically for the GM338 programming software.
3. Download and Install Updates: Follow the same installation process as before to update the software.

• Resolves "Invalid Frequency" errors on UHF GM338 models.
• Adds support for Windows 10 (32-bit mode).
• Fixes the "COM Port timeout" during read/write.

Review: Motorola GM338 Programming Software Download and Update Link

Pro Tip:

Ensure your radio battery is fully charged before attempting to read or write. If the radio loses power during a firmware flash, it can permanently damage the radio. Install the Software: Download the CPS package