Opcom 1.39 !!link!! Download

OP-COM 1.39 is a specific firmware version for a popular diagnostic tool used for Opel and Vauxhall

Step 3: Run the Opcom Software Installer

Step 5: Configure COM Port

Benefits of Using Opcom 1.39:

Step 1: Disable Antivirus Temporarily

• Opcom software installer (usually setup.exe)
• USB drivers (FTDI or CH340, depending on your interface)
• Firmware files for the hardware
• Crack or activation files (e.g., loader.exe or opcom_loader.exe)

1. Open Device Manager and note the COM port number of your Opcom interface (e.g., COM4).
2. Launch opcom_loader.exe as Administrator.
3. Go to Settings > Connection and select the matching COM port and baud rate (typically 115200).
4. Set vehicle type to “Opel” or “Vauxhall” depending on your region.