Unveiling the Dell MIH61R (10097-1): The Ultimate Guide and Manual Substitute

The Dell MIH61R (MB 10097-1) Go to product viewer dialog for this item.

Form Factor

| Feature | Specification | | :--- | :--- | | | Proprietary micro-ATX (240mm x 200mm) | | CPU Support | LGA1155 – Supports TDP up to 95W (no official support for Xeon E3-12xx) | | Chipset | Intel H61 Express | | Memory | 2 x DDR3 DIMM slots (240-pin). Max 8GB (unofficially 16GB using 8GB modules). Supports dual-channel DDR3 1066/1333/1600 MHz (1600 will downclock to 1333 on Sandy Bridge). | | Expansion Slots | 1 x PCIe x16 (v2.0), 1 x PCIe x1, 1 x PCI (32-bit legacy) | | Storage | 4 x SATA II (3Gb/s) – no SATA III natively. Some revisions have 2 SATA II + 2 SATA III via supplemental controller. | | Rear I/O | PS/2 keyboard/mouse (shared), VGA, 4 x USB 2.0, RJ-45 Ethernet, 3 x audio jacks (line-out, line-in, mic). | | Internal Headers | 2 x USB 2.0 (dual port each), front panel audio (AC’97/HD Audio), serial header (COM1), LPT header (some versions), 4-pin CPU fan, 3-pin system fan. | | Power Connector | Standard 24-pin ATX (but watch out – some Dell boards use proprietary pinouts!) + 4-pin ATX12V. | | BIOS | Dell proprietary UEFI (with legacy boot option). A11 or A14+ for Ivy Bridge support. |

Video: VGA (DB-15) is standard. Some models included an HDMI or DisplayPort if the chassis supported it.
USB: Generally 6 to 8 USB 2.0 ports.
Audio: 3.5mm jacks for Line-in, Line-out, and Mic. (Usually Realtek Audio).
LAN: RJ-45 Ethernet port (usually 10/100/1000).

Critical note:

Unlike retail boards, Dell boards rarely have a CLR_CMOS button. You must use the jumper or battery removal.

Have a specific question about a component on this board? Drop a comment below!

A. Password Clear (PSWD)

Press Ctrl + F1 while inside the BIOS (on the main screen). This reveals an “Advanced” tab with:

Placa Mae Dell Mih61r Mb 10097-1 Manual May 2026