Was Misformatted Free: The Data Packet With Type-0x96- Returned
The error message regarding a misformatted data packet with type 0x96 typically occurs when using SPD Flash Tool
Depending on the root cause, the fix will vary. Here are targeted solutions. the data packet with type-0x96- returned was misformatted
Biometric scanners are sensitive to voltage drops. If the USB port isn't providing a steady 5V, the device may initialize the 0x96 packet correctly but fail to complete the transmission, leading to a truncated, misformatted result. Step-by-Step Solutions Step 1: Power Cycle and Port Swap The error message regarding a misformatted data packet
Protocols like HDLC or proprietary serial streams use special bytes to mark Start/End (e.g., 0x7E ). If the payload contained a byte that matched
- If the payload contained a byte that matched a control character, was it properly "escaped"?
- Example: If
0x96is a control character in your protocol, it should have been transmitted as0x7D 0x96(escape sequence). If the transmitter failed to escape it, the receiver might cut the packet short, seeing0x96as a command rather than data.