V2000-c Rfid Access Control User Manual -

V2000-c RFID Access Control — Complete Guide, Tips, and Best Practices

• RFID Technology: The V2000-C system uses RFID cards or tags to grant access, providing a convenient and secure way to manage access control.
• Multi-Level Access Control: The system allows for multi-level access control, enabling administrators to assign different access levels to individuals or groups.
• Event Logging: The system logs all access events, providing a record of who entered which area and at what time.
• Durable Design: The V2000-C system is designed to withstand harsh environments, ensuring reliable operation in various conditions.

• Action: [Master Code] + #
• Success: 2 beeps + Green LED flashes once.
• Exit: * + # (or wait 15 seconds).

4.2 Wiring Diagram (Simplified)

Model

| Parameter | Value | | :--- | :--- | | | V2000-c | | Operating Voltage | 10V – 14V DC (12V nominal) | | Standby Current | ≤ 80mA | | Maximum Current | ≤ 150mA (excluding lock) | | Relay Contact Rating | 3A @ 30V DC (resistive) | | RFID Frequency | 125kHz (EM4100) or 13.56MHz (Mifare S50/70) | | Read Range | 2-5 cm depending on card type | | User Capacity | 500 (cards + PINs) | | Event Log | None (standalone) | | Operating Temperature | -20°C to +60°C (-4°F to 140°F) | | Humidity | 10% – 90% (non-condensing) | | Dimensions (mm) | 120 x 78 x 25 |

LED Indications:

"Invalid Card"

| Issue | Common Solution | | :--- | :--- | | | The card is not registered in the device, or the ID format is incorrect. | | Door won't open | Check power supply (ensure 12V is stable) or check relay wiring (NO vs NC settings). | | Forgot Admin PIN | Perform a hardware reset (usually involves shorting specific pins on the motherboard or pressing a reset button inside the casing). | | Cannot read cards | Clean the sensor area. If using ID cards, ensure the device supports 125kHz frequency. | V2000-c Rfid Access Control User Manual