Weierwei Vev3288s Manual Patched -
For sale: Weierwei VEV3288S — Manual (patched)
- Original Manual Error: Claims the yellow wire (B+) is constant 12V and red (ACC) is switched. (Correct, but wiring colors listed for the adapter were wrong).
- Patched Correction: Clarifies that on the vehicle-specific harness (not the universal one), the orange wire is for reverse trigger, not illumination. The patched manual includes a new wiring table.
? Let us know which firmware or software version worked best for you in the comments below! To help me refine this for you, let me know:
while turning the unit on to display current frequency constraints, such as [400--475M] [136--174M] VFO/Frequency Mode Activation: Press and hold the key while pressing the Keypad Unlocking/Full Range: A common modification includes pressing on the keypad, then to initiate frequency range expansion. RadioReference.com Forums 2. Manual Programming Instructions (No PC Needed) Channel Entry: Select Frequency Mode, enter desired RX frequency, hold shows), choose channel number using up/down, press Setting Repeater Offset: Enter RX frequency, press to enter channel mode, set the channel, then configure the offset via the CTCSS/DCS Setup: Press and hold key to set the transmit tone. RadioReference.com Forums 3. Key Specifications for VEV-3288S Typically 5W VHF / 4W UHF (selectable Hi/Lo). Operating Voltage: Supports Channel (MR) and Frequency (VFO) modes. Twins Production 4. Common Troubleshooting in Manual If the radio shows V--0505 18 weierwei vev3288s manual patched